Repairs & faults
Why does boiler pressure keep dropping?
What recurring pressure loss can mean and the safe checks you can make without opening your boiler.

Know your system’s normal pressure
Pressure readings vary between systems and change as water warms up. Use the manufacturer’s manual to identify the correct cold pressure range for your boiler. Do not rely on a number intended for a different appliance.
Look for visible signs
With the system cool, look for visible drips or damp patches around radiator valves and accessible pipework. Note any boiler error code and when the pressure falls.
Do not remove the casing or touch internal components. Water leaking near electrical equipment needs professional attention.
Repeated topping-up is not a repair
A one-off pressure drop after bleeding radiators is different from recurring pressure loss. Frequent refilling can mask a leak or another system fault and should not become a routine solution.
If your manual permits you to top up the system, follow it carefully and close the filling controls afterwards. If unsure, stop and call an engineer. Never overfill or leave a filling connection open.
What an engineer may investigate
Possible causes include leaks, a pressure relief valve problem or an expansion vessel issue. Diagnosis depends on the pressure behaviour and the system, so do not assume one replacement part will solve it.
Tell us the boiler make, error code and how quickly pressure changes when you send an enquiry.
This guide is general information, not a diagnosis for your appliance. Follow the manufacturer’s instructions and ask a qualified engineer when unsure. Never remove a boiler casing or attempt gas work yourself.
