Skip to main content
TrustpilotFind us on Trustpilot
5.0Rated 5.0 from 11 Google reviews
Advice Centre

Energy saving

How to bleed a radiator safely

Simple checks for a radiator that is cold at the top, and when to call an engineer.

By the Flowtech Heating team4 min read
Hand adjusting a thermostatic radiator valve

Check the symptoms first

A radiator that feels cold at the top may contain trapped air. A cold bottom, or one radiator that stays cold throughout, can point to a different issue such as circulation, balancing or sludge. Bleeding will not resolve every cold radiator.

Let everything cool

Turn the heating off and allow radiators to cool fully before opening a bleed valve. Hot water can cause burns. Have a suitable radiator key, a cloth and a small container ready. Follow the system and radiator instructions if available.

Release air carefully

Protect nearby surfaces. Slowly open the bleed valve a small amount, keeping hands and face away from it. You may hear air escaping. Once a steady trickle of water appears, close the valve gently without overtightening.

Do not remove the valve, force a stuck fitting or continue if water leaks from somewhere else. Stop and contact an engineer if the valve is damaged or you are unsure.

Check the system afterwards

On a sealed system, bleeding can lower pressure. Check the boiler manual for the correct cold pressure and its topping-up procedure. If you are unfamiliar with the controls or the pressure repeatedly drops, ask us to investigate rather than repeatedly refilling.

Turn the heating back on and check for leaks and even warmth. Persistent cold spots or frequent air build-up deserve an assessment.

This guide is general information, not a diagnosis for your appliance. Follow the manufacturer’s instructions and ask a qualified engineer when unsure. Never remove a boiler casing or attempt gas work yourself.

Need advice specific to your home?

Speak to our team about your boiler, servicing or heating system.